How to Clean a Leather English Saddle
The first thing you should do before cleaning your leather English saddle is to remove any loose dirt or debris. You can do this by using a pressure wand, a glycerine soap or even a toothbrush. Nevertheless, you should be careful not to use caustic household chemicals or baby wipes. These chemicals can actually damage the finish of your saddle. It is best to use a saddle soap that is specially made for leather tack.
Using a pressure wand
Using a pressure wand to wipe down a leather English saddle can make it look like new. However, these saddles do need a little more elbow grease and care. To properly clean them, you will need to disassemble them. This can be a difficult process if you are new to saddle cleaning. However, you should follow the instructions on the packaging to avoid any damage. You should also make sure to clean any areas that have been impacted by excess heat or moisture. After cleaning the saddle, check its condition and check for any damaged stitching or leather.
If you use a pressure wand to clean tack, you must be sure that you only use it for superficial dirt. If you are cleaning a saddle with deep dirt, you should clean it by hand. If you have a synthetic saddle, use a mild soap solution and warm water. This will loosen any dirt that has stuck to it. Rinse the saddle thoroughly, then allow it to air dry.
Using glycerine soap
Using glycerine soap to wash a leather English saddle will remove dirt and grease. It will also restore moisture and oils in the leather. After cleaning, you can apply a conditioner with a clean sponge. You should do this regularly to prolong the life of the saddle.
You can use Farnam’s soap, which is more concentrated. You can spray the soap directly on the leather or use a cloth to rub it in. However, you shouldn’t put too much on the saddle, as it won’t dry quickly and will retain a strong smell.
After cleaning the saddle, you can apply a non-detergent leather conditioner. Make sure to use a gentle, non-abrasive leather conditioner, because too much will damage the leather finish.
Using a toothbrush
If you want to clean a leather English saddle, you should not use harsh chemicals. Using a soft bristled toothbrush will help remove dirt and grime. Brushing is a good way to clean the saddle because it will allow you to get into hard to reach places and under the flaps. Brushes are also helpful for cleaning synthetic saddles. For best results, use a soft brush and work in circular motions.
Another way to clean a leather English saddle is by applying saddle soap to it. Apply it in a circular motion to the leather area, avoiding the suede areas. Do not forget to apply it under the flaps and undersides of the leather, as well as between the flaps. Repeat the cleaning process as needed. You may need to apply saddle soap several times to achieve the best results. If you are not satisfied with the results, you can use a cotton swab to remove any soap residue.
Using a metal cleaner
Using a metal cleaner on a leather English saddle is not recommended. The cleaner can cause damage to the saddle by causing it to become brittle. Instead, use a mild leather cleaner that you can apply to the saddle in small circular motions. It is important to wash all of the leather parts of the saddle, including the knee rolls and undersides. Also, do not use the cleaner on suede or rough-out areas. After cleaning the saddle, make sure to use a soft cloth to wipe the saddle dry. If the soap is left on the saddle, it will attract dirt and other contaminants.
While cleaning a saddle can be time-consuming, it is essential to keep it clean to prevent rust and tarnish. A little bit of metal polish will also shine up the buckles, giving them a shiny finish.
Using a leather conditioner
Using a leather conditioner to clean tack such as a leather English saddle can be beneficial. It will help to keep your saddle looking newer, as well as prevent any harmful residues from being deposited on it. However, be sure not to use too much leather conditioner, as too much can penetrate the padding and saddle tree, causing damage.
First, you need to clean the saddle thoroughly and inspect it for damage. Make sure to clean the hard places, such as embossing and stitching lines. You should also clean off any excess hair or dirt from the saddle’s surface. While cleaning your saddle, you must make sure to wipe it dry afterward. To avoid over-rinsing, you can use a spray-on saddle soap.