How to Clean and Waterproof Leather Boots
Taking proper care of your leather boots is important to maintain its color and waterproof seal. To do so, you can apply a silicone spray or a wax. Once these two steps are completed, the boots should be ready for use again. However, you should first check the label of the product you use. If you are unsure about the results, test the product on a small area first. When you are satisfied with the result, apply the treatment to the entire boot. Make sure to pay special attention to the creases and seams. These areas are prone to leakage of material. After you are finished, let your boots dry in a temperature where there is low humidity and adequate ventilation.
Using a silicone spray
Before waterproofing your leather boots, you need to clean them properly. You can start by rubbing the leather cleaner on the leather in circular motions, then use a cloth to wipe off any excess product. A clean, dry T-shirt can also be used to clean the leather. After cleaning the boots, you need to apply the wax to the leather, making sure that the wax is evenly distributed. You can then leave the boots to dry in a warm area, preferably overnight.
Another method is to use a silicone spray to clean and waterproof your leather boots. Silicone-based products work best on dark leathers, but they can damage fine leathers. When using a silicone spray, make sure to apply it at the seam where the upper meets the sole, which is a common area where water leaks. A silicone spray can last for a few days, or even a week, depending on how often you use the boots.
Using a wax
Before you begin waxing leather boots, you should clean them thoroughly. You can use a leather cleaner to do this. It should be applied using circular motions to remove dirt and grime. You should then use a clean cloth to wipe them off. An old T-shirt will work well. After the boots are clean, they should be left to dry naturally before they are waterproofed and properly conditioned. If you’ve already purchased a wax product, you can skip this step.
A waterproofing spray is another option that can improve the quality of your leather boots. These sprays come in aerosol cans, so you can apply them more quickly than a wax. However, they don’t soak into the leather as deeply as a wax. Therefore, you’ll probably need to apply them a few times throughout the winter to get the best results.
Using a wax to restore the waterproof seal
You can easily restore the waterproof seal of your leather boots by using a wax. There are many types of wax that can do this job. Some are only waterproofing, while others have both waterproofing and conditioning properties. You can buy a wax in the form of a stick balm, a flat pallet, or a spray.
Wax is much more durable than oil. You should use a shearable wax. When applying the wax, wear gloves and make sure the entire boot is covered. Use a thick coat, and make sure that you cover all of the surface area.
Using a wax to restore the color
If you’re interested in restoring the color of leather boots, it’s possible to do so easily at home using a wax. Many of these products are water-resistant and can be applied to a variety of leather materials. They work by making water bead off the surface, preventing it from staining the leather. The best waterproofing products are those made from beeswax, such as Atsko Sno-Seal Original Beeswax.
The right type of wax will restore the color of leather boots, giving them a shiny, smooth finish. Mink oil is better shelf-stable than other animal fats, so Mink Oil Boot Conditioner can be used on most types of leather, restoring the shine and color of the leather. It is also non-toxic and works on most types of leather, including nubuck.
