How to Clean White Patent Leather 
The first step in cleaning white patent leather is to remove any dirt or debris. You can do this with toothpaste, non-acetyone nail polish remover, and aerosol hairspray. After cleaning the leather, it is a good idea to use a polish or wax to protect it and keep it looking its best. Alternatively, you can spray it with vaseline to shine and waterproof it.
Baking soda
When it comes to cleaning white patent leather, you have a few options. You can try using baking soda to clean your shoes, but be sure to follow the directions on the packaging. Baking soda can be a messy material to work with, so it is important to take precautions and use it in small amounts. It is also important to avoid letting it stay on the leather for long periods of time.
Another option is to use white vinegar. The acidity of vinegar can damage the leather and leave a sticky residue. Baking soda’s alkaline nature can balance the pH level and remove dirt without affecting the color of the leather. You will have to make sure that you clean thoroughly to prevent a chemical reaction.
Scotch tape
If you have white patent leather shoes, you may want to know how to clean them. Using Scotch tape is one effective way to remove dirt from these expensive fabrics. You can also clean stains with rubbing alcohol and a cotton ball. The rubbing alcohol will help remove ink, makeup, and other stains. This method is also effective for cleaning stains that have penetrated into the inside of the garment.
Another effective way to clean white patent leather is using a homemade solution. For this method, mix baking soda with a few tablespoons of water to form a paste. You can then apply this paste to the leather using a cotton swab or clean microfiber cloth. Once the paste is applied, gently rub it into the leather, letting it sit for a few minutes before removing.
Hairspray
If you want to clean white patent leather, you may want to use hairspray. Often, it works well at removing ink stains from the surface. However, this can also damage the leather, so you should be careful when using hairspray. However, if you’re having trouble cleaning your patent leather, you can use rubbing alcohol instead. This will help remove stubborn surface stains, but make sure that you dilute it properly. Always conduct a patch test first.
White patent leather is very difficult to clean due to the ink stains. A white eraser will help get rid of these ink stains. To apply hairspray, aim the nozzle 12 inches from the surface. Then, rub the cloth gently. Do not rub too hard, because you may damage the leather.
Vinegar
Using vinegar to clean white patent leather is an effective way to remove sticky residue from the surface. Just be sure to follow the instructions on the bottle carefully. After cleaning, it should feel as clean and fresh as it did before. You can repeat the cleaning process if necessary. If the residue is still present, use baking soda or baby oil to remove it.
The solution can also be used to remove surface stains on a white leather purse. White vinegar can be used in a 1:10 ratio with water to remove stubborn surface stains. It can also be used with rubbing alcohol, although the results may differ slightly. It is also important to dilute the solution slowly so it does not damage the surface.
Ink-removing liquids
There are a few different methods to remove ink stains from leather. The least invasive one involves using a solution of soap and water. This solution can be a homemade mixture or a dedicated ink removing solution. The first step is to wet a cloth with the solution. Next, rub the solution gently over the stained area. Remember not to scrub or rub too hard, as this can spread the stain. You should repeat the process until the ink stain is gone from the surface.
Ink stains are more difficult to remove the longer they remain on the leather. Fresh ink is easier to remove than dried-up ink. Before using any of these methods, test them first on a small patch of the stained area to see if they will damage the leather’s dye or treatment.
Petroleum jelly
Petroleum jelly has a strange reputation in beauty circles, but it’s a great tool for cleaning patent leather shoes. Not only is it effective for chapped lips and skin slugging, but it can also be used to clean patent leather shoes. Simply rub a small amount of the stuff into the leather, then wipe it off with another clean cloth.
You can also use rubbing alcohol or petroleum jelly on scuff marks. It helps maintain the finish on leather and prevents it from cracking. The product will also make your shoes waterproof.
