How to Clean Aniline Leather in Car 
There are several ways to clean aniline leather in your car. These methods range from using homemade leather cleaning solutions to using a Tampico brush and talcum powder. However, you should use a suitable product for the type of leather you own. If you’re unsure, you can always use a microscope to determine the type of leather. If you see pores in the leather, it is probably aniline.
Homemade leather cleaning solutions
If your car is made of pure aniline leather, it’s important to clean it on a regular basis. To do this, you can purchase a commercial cleaner or use a homemade solution. When cleaning the leather, always use light pressure and a clean, white cloth. Avoid over-wetting it, as it can permanently damage the finish and cause more stains.
A homemade aniline leather cleaning solution is an inexpensive, environmentally friendly alternative to commercial products. You can make this solution using a plant spray bottle filled with vinegar and water. It’s proven to be effective, but you’ll need to test it on a small area first. Then, apply it to your seats as directed.
If you use a vacuum, make sure the seats are thoroughly vacuumed. You should also use an air compressor to get rid of any dust on the car’s interior. Make sure you use the right vacuum extension to avoid damaging the leather. Once you’ve cleaned the seats, you’ll need a cloth to wipe them dry. Microfiber cloths are best for this, as they will grab microscopic dirt particles.
Tampico brush
Aniline leather is prone to dryness and requires special attention when cleaned. To prevent this, car care product companies manufacture leather care products with pH balance that help remove body oils without damaging the surface of the leather. These products also help replenish lost oils. Aniline leather is treated like skin, and can benefit from the use of a good quality soap and lotion.
For deep cleaning light coloured leather, you may want to use a natural-fibre Tampico brush. It is effective at removing dust, grime, and stains from the leather pores. It is also anti-static, which will protect the leather against static electricity and corrosion.
A good quality brush can help you get rid of stubborn dirt and dust from the surface of aniline leather. Its ergonomic shape makes it easy to grip and reach difficult areas. Its bristles are made from sustainably-harvested tampico fibers. Always dry the tampico brush after using it.
Talcum powder
To clean aniline leather, it is necessary to follow certain steps. First, apply talcum powder to the stained area. The powder will absorb the oils and grease from the leather. Next, rub the area with a soft tissue. Repeat this process as often as necessary.
Aniline leather is made of the best quality hides and has extra softness. However, cleaning this type of leather is a pain as it has no protective coating and allows water to pass through it. Thankfully, most cars no longer have aniline leather seats because it’s difficult to clean properly.
If you have spilled a beverage on your car’s leather seats, you can use talcum powder to clean it without damaging the upholstery. Talcum powder is gentle on the leather and works well for removing grease stains. While it may not be as effective as talcum powder, it can be used to remove stubborn grease.
COLOURLOCK Aniline Cream
If you want to restore the original colour of your car’s leather interior, you can use the COLOURLOCK Aniline Cream. Using a soft cloth, apply a thin layer on the surface. Then, use a circular motion to rub the cream in. Repeat this procedure up to three times, depending on the amount of wear on the leather. You need to re-apply the product every three months, or more often if the leather is soiled or stained.
The Colourlock Aniline Cream for cleaning anilines leather in car contains all the necessary ingredients for cleaning, protecting, and preserving aniline leather. The cream is especially helpful for leather with open, partially open, or oily pores. The cream will not only clean the surface but will also help maintain its color and texture.
Aniline cream is designed for use on top-grain, matt, and fine-pored leather. It’s highly absorbent, which means that it will soak up dirt and moisture. The water-based formula of the cream helps keep the leather from breaking down. However, it’s best not to use this product on nubuck or suede leather. When using an aniline cleaner, use a small test area first to make sure it doesn’t damage the surface.
